How To Install ClockWorkMod Recovery on Samsung Galaxy Tab 2 [7.0] P3100 ?

Leave a Comment


This tutorial will help you to install ClockWorkMod recovery on Samsung Galaxy Tab 2 [7.0] Model P3100 using which you can flash custom roms like Cyanogen Mod, PacMan ROM etc.


Install ClockWorkMod Recovery on Samsung Galaxy Tab 2
Please Note The Following

1) Following tutorial is only applicable for Samsung Galaxy Tab 2 [7.0] with Model No. P3100

2) Completely follow the tutorial step by step.

3) Make sure your device is having minimum 80 percent of battery backup.

4) Kindly make an attempt at your own risk, we will not be held responsible for any mishap occurred during or after the process.

5) Installing Custom Recovery on Tab 2 will Void your tablet's warranty.



Things You Will Require To Root Your Device

1) Back Up entire data on your tablet before making an attempt.

2) Enable USB debugging on your Android device. Head Towards Settings -> Scroll to the extreme bottom -> Click on Developer Options -> Check USB Debugging.

3) Install USB Driver's for Tab 2 [7.0] P3100 on your computer Or Install and run the latest version of Samsung Kies on your computer.

4) Download CWM for Tab 2 7.0.

5) Download ODIN V3.07.

6) Don't Extract CWM for Tab 2 7.0 Folder where extract folder ODIN V3.07 to find an windows executable file.

Steps Involved are as follows


1) Switch off your device and enter into Download Mode by pressing Power & Volume Down button together.


2) On Your Computer open the folder you downloaded & Extracted earlier. Head towards the folder containing ODIN V3.07. Right click on the executable file and run as administrator.

3) Connect your Tab 2 7.0 with computer using the proprietary USB cable. Now hit Volume Up for continuing the process further.

Once you continue you will see the device gets connected with the computer using ODIN V3.07.

While on ODIN a connected device is shown as added in the message box. Make sure you have checked Auto Reboot & F.reset Time

4) Now on the other side check PDA, browse & select the CWM recovery file with .tar extension. Wait for a few seconds & Hit Start.

5) The process will hardly take a minute and if everything goes like planned, you will see a green pass notification in the ID:COM box above.

Please Note : In Case you see your tablet restarting continuously after Samsung's Boot logo, then switch off your device completely using power button and follow the steps again.

To boot into CWM recovery, hold & press power & volume up button together. Release both the buttons as soon as you see the boot logo.

Congratulations, you have successfully installed Clock Work Mod Recovery on Samsung Galaxy Tab 2 [7.0[ P3100. In case you face any trouble, please do bother us via comments.

Share the same with friends & family. 



0 comments:

Post a Comment

badge